What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
15.06.2025 00:43

2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is 'the assistant's answer'
It seems Mohan does not understand the difference between a comment and an Answer.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
A circuit breaker is similar, but is resettable.
One is “what exactly is in a ‘surge protector’ ? ”
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
The MOV will conduct when the voltage exceeds 50% of line voltage.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
What is the most inappropriate experience you have had with a friend's daughter?
First Sentence:
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Here is a simplified AC power diagram.
what exactly is a ‘surge’ protector?
At least they know the answer if they wanted it.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
but this device (an Inductor) … impedes the rapid changes in the current.
I post the exact comment here.
These devices are installed between the “hot” and “neutral” and protective ground.
There are three different concepts here that are getting confused.
2024–10–16 [ OO OLAOYE OYEBODE ]
so, what happens?
What is the most interesting question you can ask to get to know someone?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
These are simplified answers to the original question, and does not change anything I wrote above.
Barnstars:
Why are there so many girls and not enough boys to follow?
The bolt then partially travels down the line to your home.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Have you been arrested or investigated?
An AC voltage/ current source, and an ac inductive load.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
He then describes Rainy Season and Lightning.
What do porn stars do when they get old?
a photo is worth a thousand words.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
The other is “what does a “fuse” do?”
Here’s why exercise is so important if you’re a cancer survivor - The Washington Post
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
What is the Abu Shusha massacre in Palestine?
At one ohm, the resistor has a maximum of 1 watt power.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is where the MOV conducts again, and dissipated the energy.
NASA KSC Workforce Transformation (Layoff) Update - NASA Watch
It also is a device that limits the change in current flow.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
eight
What is one thing which you cannot stop however hard you try?
2024–10–14 [Omar Gharbi Omar Gharbi ]
but I think this circuit , shows a few more pieces.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
For this case there are devices called Metal oxide varistors (MOV).
The third is lightning and “how it gets conducted into a home.”
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
There are two important concepts here.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Because the load is inductive, the current lags the voltage.(by a bit).
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
[old diagram got deleted by accident]
In schematic diagrams this is the symbol for a fuse:
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
(Dc diagram shown, AC is similar).
What is lightning?
Now when you have a certain ac resistance, then a current flows in a loop.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
But… the neutral is now “floating” because of the 1 ohm resistance.
This one hit behind the barn.
2024–10–10[John johnson John Johnson ]
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
What does a fuse do?
Upvotes:
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Edit 2024–10.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
He then describes the function of a fuse.
He then asserts :
Can the fuse protect the electronic devices from lightning instead of a surge protector.
This device then solves the entire problem.
A fuse is a non-resetable over current circuit protector.
nine
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
the problem then depends on "how fast does the fuse operate?".
But it can get overloaded, and no longer works.
[image of Common-mode choke]
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
One